Fujitsu IMAGE SCANNER FI-4860C Operator's Manual page 200

3) In case of (2) or (3), by pressing
<Screen5-1>.
4) At <Screen5-1>, by pressing
document length can be specified.
By pressing (Right arrow button), selection moves from (1) to (3).
By pressing (Left arrow button), selection moves from (3) to (1).
(1) [10] is blinking:
(2) [15] is blinking:
(3) [20] is blinking:
5) Press (Enter button) and the setting becomes valid.
Press (EXIT button) at <Screen5-1>, then the LCD display changes to
<Screen5>.
Press (EXIT button) again and the LCD display goes back to [Ready] screen.
(Enter button), LCD display changes to
<Screen5-1>
! 0 5 - 1
= 1 0 / 1
(Left arrow button) or
The document length difference below 10mm is not detected
as an error.
The document length difference below 15mm is not detected
as an error.
The document length difference below 20mm is not detected
as an error.
L e n g t h
5 / 2 0 m m
(Right arrow button), the
7.3 Setup Mode Details
7
177