Cleaning The Rollers - Fujitsu IMAGE SCANNER FI-4860C Operator's Manual

3.3 Cleaning the Rollers

■ Cleaning the rollers with the cleaning sheet
1. Set the Side guide for B4 size width.
2. Set the scanner in Test mode: For the details of the procedure, refer to the section
"7.5 Test Mode Details."
3. Press (Next button) to show the following screen.
4. Remove the protective paper from the cleaning sheet.
5. Place the cleaning sheet on the hopper table, aligning the left side with the hopper
guide and with the adhesive side up. Press
sheet is fed.
6. When [Hopper Empty] is displayed, press
42

3.3 Cleaning the Rollers

T 0 2 M u l
(Start button), then the cleaning
(Cancel button).
t i f e e d