Fujitsu IMAGE SCANNER FI-4860C Operator's Manual page 243

4) Specify the scanning conditions.
(1) At <Screen50-2>, select the left most item, [S] in the sample screen, and press
(Enter button). Then the LCD display shows <Screen50-2.1>.
At this screen, press
simplex or duplex.
Press (Enter button) and confirm the setting.
Then the display goes back to <Screen50-2>.
(2) At <Screen50-2>, select the second item from left, [A4P] in the sample screen, and
press
At this screen, press
document size and the orientation. Following parameters can be specified.
A4 portrait
B4 portrait
Legal portrait
11 x 17 inch portrait
A3 portrait
A5 landscape
B5 landscape
Letter landscape
A4 landscape
A5 portrait
B5 portrait
Letter portrait
220
7.5 Test Mode Details
<Screen50-2.1>
S I M
(Left arrow button) or
(Enter button). Then the LCD display shows <Screen50-2.2>.
<Screen50-2.2>
(Left arrow button) or
P L E X /
S I M P L E
(Right arrow button) and select
P A P R S
E
A 4 P
(Right arrow button) and select the
A4P
B4P
LGP
DLP
A3P
A5L
B5L
LTL
A4L
A5P
B5P
LTP
D U P L E X
X
E
I Z