Fujitsu IMAGE SCANNER FI-4860C Operator's Manual page 189

LCD Descriptions
display
B.Drop-out Specifies the back
page dropout color
for mono color scan.
Brightness Adjust the Front/
Back Brightness to
compensate the
grayscale level dif-
ferences.
SCSI ID Specifies SCSI ID of
the scanner.
Product ID Specifies the scan-
ner product ID.
SCSI Bus Specifies SCSI data
bus width, 8bit or 16
bit.
Interface Specifies the inter-
face to use when a
optional or third
party interface
board is installed in
the TPS (Third
Party Slot).
166
7.2 Setup mode functions
Selectable Default
parameters
R/ G
G/
B
-6 to +6 0
0 to 7 5
fi4860C/ fi4860C
fi4990C/
4099DC/
M3099G
16bit/ 16bit
8bit
Auto/ Auto
SCSI/
TPS
Mode Remarks
On- Off-
line line
Avail- Avail- Setup done
able able via the PC
has the prior-
ity.
Avail- Avail-
able able
Not Avail- New SCSI ID
Avail- able valid after
able turning on
the power
again.
Not Avail- New setting
Avail- able valid after
able turning on
the power
again.
Not Avail- New setting
Avail- able valid after
able turning on
the power
again.
Not Avail-
Avail- able
able