Fujitsu IMAGE SCANNER FI-4860C Operator's Manual page 234

28. Setting Brightness
1) Press (Next button) or
2) At <Screen28>, to adjust the Brightness, press
[Yes].
Press (Enter button) to confirm the selection. <Screen28-1> is displayed.
If Brightness adjustment is not required, select [No] and press
HINT
3) At <Screen28-1>, to adjust the front-side brightness, press
and select [Front].
If back side needs brightness adjustment, press
[Back].
If the brightness needs to be increased, press
is pressed the brightness value increases by 1.
If the brightness needs to be decreased, press
button is pressed, the brightness decreased by 1.
4) Press (Enter button) and make the setting valid.
Press (EXIT button) at <Screen28-1> then the LCD display changes to
<Screen28>.
Press (EXIT button) at <Screen28> and the LCD display goes back to [Ready]
screen.
(Previous button) and let LCD display <Screen28>.
<Screen28>
! 2 8 B r
C n g
h a
<Screen28-1>
2 8
! - 1
F o n t :
r
The blinking item is the one selected.
i g h t n e s
e ? N o / Y
(Right arrow button) and select
(Enter button).
B t
r i g h n
0 B a k
c
(Left arrow button)
(Right arrow button) and select
(Next button). Each time the button
(Previous button). Each time the
7.3 Setup Mode Details
s
e s
7
e s s
: 0
211