Fujitsu IMAGE SCANNER FI-4860C Operator's Manual page 201

6. Setting Skew Check
1) Pressing
2) If you want to enable Skew check at <Screen6>, press
select [On].
To disable Skew-check, press
(Enter button).
3) Press (Enter button) and make the setting valid.
Press (EXIT button) at the end and the LCD display goes back to [Ready] screen.
178
7.3 Setup Mode Details
(Next button) or (Previous button) and let the LCD show <Screen6>.
<Screen6>
! 0 6
=
(Right arrow button) and select [Off] then press
S k e w C h
O n / O f f
(Left arrow button), and
e c k