Fujitsu IMAGE SCANNER FI-4860C Operator's Manual page 231

26. Reset the remaining ink counter of imprinter.
If the following message comes up, prepare the new Print cartridge. If no further printing
is impossible, replace the Print cartridge and reset the ink counter. If the Print cartridge
is replaced before Print cartridge error occurs, be sure to reset the remaining ink
counter.
HINT
1) Press (Next button) or
Approximate remaining ink amount is shown as below:
HINT
208
7.3 Setup Mode Details
P l e a s
e
N o w R e
[XXXX] is the scanned sheet counter value.
(Previous button) and let LCD display <Screen26>.
<Screen26>
! 2 6 I n
=
- Amount of remaining ink is high.
- The amount of remaining ink is low or empty.
In [XXXX], [Pre] or [Post] is displayed.
a n e w
a d i n g ! x
k ( x x x x )
s
R e e t
I n k
x x x
/ N o