Serial Api Commands; Adr-Address; Aim-Auto Image - Christie 599 GS Series Technical Reference

Serial API commands

The GS Series 599 commands can be used to modify product settings.
ADR–Address
Sets or queries the device address.
This command also helps to identify where a response or asynchronous message originates from.
Generally, this command is used for projectors that are daisy-chained together using the RS232 style
communication.
Commands
Command Description
ADR ? Checks the current projector address.
(Read-only)
ADR <value> Sets the projector address to <value>.
Examples
Set the projector address to six:
(ADR 6)
AIM–Auto Image
Reacquires and locks an input signal.
Commands
Command Description
AIM ? Checks the current Auto Image
value. (Read-only)
AIM <0 | 1> Reacquires an input signal.
(Write-only)
GS Series 599 Serial Commands Technical Reference
020-102403-02 Rev. 1 (04-2017)
Copyright 2017 Christie Digital Systems USA Inc. All rights reserved.
©
Values
—
0 to 9
0 (Default)
Values
—
0 = Normal mode—Supports all 4:3 input sources.
10