Cha-Channel; Fcs-Focus Lens Position Adjustment - Christie CineLife+ 4 Series Technical Reference

CHA–Channel
Selects the channel configuration.
Parameters
• Access level: Operator
• Power level (minimum): Power Up
Commands
Command Description
CHA? Returns the active channel name. (Read-only)
CHA?L Returns a list of available channels. (Read-only)
CHA "<value>" Sets the channel configuration.
Examples
Return the active channel name:
(CHA?)
Result:
(CHA! "Media Block Flat")
Set the channel to Media Block Flat:
(CHA "Media Block Flat")
FCS–Focus Lens Position Adjustment
Adjusts the lens to a specific focus position with a specified direction.
In most cases the active lens file is the one specified by the current channel. If a user selects a
different lens file in the user interface ILS File Setup panel, the selected lens file becomes active. That
file may be different than the one specified by the current channel.
Parameters
• Access level: Operator
• Power level (minimum): Power Up
CineLife+ Technical Reference–Serial Commands
020-103075-05 Rev. 1 (09-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
™
CineLife+ serial commands
Values
—
—
value = "Channel name"
Send (CHA?L) to see a list of available
channels and then use this command to set
the channel configuration.
10