Configuring The Video Settings; Adjusting Black And White Video; Adjusting The Color Balance; Setting The Input Levels - Christie Inspire Series User Manual

Configuring the video settings

Configure the video settings to optimize the image performance, such as applying color to black and
white videos, reducing luminance component noise, and so on.

Adjusting black and white video

Adjust a video image from black and white to fully saturated color. This feature is for video sources
only.
1. Select Menu > Image Settings > Video Options > Color.
2. Adjust the slider by arrow keys or select ENTER to input the value.
3. After inputting the value, select ENTER to apply.

Adjusting the color balance

Adjust the red-green color balance in NTSC video images. NTSC, named after the National
Television System Committee, is the analog video color system used in North America and most of
the South America countries. This feature is for NTSC video sources only.
1. Select Menu > Image Settings > Video Options > Tint.
2. Adjust the slider by arrow keys or select ENTER to input the value.
3. After inputting the value, select ENTER to apply.

Setting the input levels

If the image is displayed by an analog signal, such as VGA signal, the image may have odd color on
the screen. These functions are used to adjust gain and offset error and correct the color.

Adjusting the color gain

Set the color gain to correct the color intensity of the image. This function is used when the image
is displayed by VGA or component and the color is incorrect.
1. Select Menu > Image Settings > Input Levels.
2. Select appropriate color gain:
• Red Gain
• Green Gain
• Blue Gain
3. Adjust the slider by arrow keys or select ENTER to input the value.
4. After inputting the value, select ENTER to apply.
Inspire Series 4K User Manual
020-002098-01 Rev. 1 (09-2023)
Copyright © 2023 Christie Digital Systems USA Inc. All rights reserved.
If printed, please recycle this document after use.
Adjusting the image settings
39