Commands
Command
Description
TNT <value>
Sets the red-to-green color balance in the image.
Examples
Set the red-to-green color balance to 50:
(TNT 50)
UID–Enter Service Mode
Puts the projector in service mode.
Commands
Command
UID "service,service"
VBL–Video Black Level
Optimizes the black level for analog video signals.
When this option is on, the projector analyzes the current image, calculates an offset value, and adds
it to the analog digital converter black level value.
Commands
Command
Description
VBL <0 | 1>
Enables or disables video black level
optimization.
Examples
Turn off video black level optimization:
(VBL 0)
Turn on video black level optimization:
(VBL 1)
GS Series 599 Serial Commands Technical Reference
020-102403-02 Rev. 1 (04-2017)
Copyright
2017 Christie Digital Systems USA Inc. All rights reserved.
©
Description
Places the projector in service mode. (Write-only)
Serial API commands
Values
0 to 100
50 (Default)
Values
—
Values
0 = Turns off video black level optimization
1 = Turns on video black level optimization
61