2. Select appropriate level for MPEG noise reduction.
3. To confirm the selection, press ENTER.
Setting the input levels
If the image is displayed by an analog signal, such as VGA signal,
on the screen. These functions are used to adjust gain and offset error and correct the color.
Adjusting the color gain
Set the color gain to correct the color intensity of the image. This function is used when the image
is displayed by VGA or component and the color is incorrect.
1. Select Menu > Image Settings > Input Levels.
2. Select appropriate color gain:
•
Red Gain
•
Green Gain
•
Blue Gain
3. Adjust the slider by arrow keys or press ENTER to input the value.
4. After inputting the value, press ENTER to apply.
Adjusting the color offset
Set the color gain to correct the degree of color difference of the image. This function is used when
the image is displayed by VGA signal and the color is incorrect.
1. Select Menu > Image Settings > Input Levels.
2. Select appropriate color offset:
•
Red Offset
•
Green Offset
•
Blue Offset
3. Adjust the slider by arrow keys or press ENTER to input the value.
4. After inputting the value, press ENTER to apply.
Syncing the input signal
Synchronize the input signal when the projector and the connected hardware device, such as a DVD
player, are not syncing properly.
1. Select Menu > Image Settings > Input Levels > Sync Threshold.
2. Press ENTER.
HS Series 2K User Manual — D13HD2-HS, D13WU2-HS, D16HD-HS, D16WU-HS, D20HD-HS, D20WU-HS
020-001466-06 Rev. 1 (12-2022)
Copyright ©2022 Christie Digital Systems USA Inc. All rights reserved.
Adjusting the image settings
the image may have an
odd color
38