Setting The Digital Size Of Display Image; Setting The Digital Position Of Display Image; Geometry Correction; Saving Geometry Correction - Christie HS 2K Series User Manual

Setting the digital size of display image

These functions are similar technologies as in-camera image processing. Use Digital Horz Zoom or
Digital Vert Zoom to enlarge or to compress the display image horizontally or vertically.
1. Select Menu > Size & Position > Digital Horz Zoom or Digital Vert Zoom.
2. Adjust the slider by arrow keys or select ENTER to input the value you selected.
3. After inputting the value, select ENTER to apply.

Setting the digital position of display image

Change the position of the projector's display image horizontally or vertically.
Digital Horz Shift is only available after adjusting the Digital Horz Zoom, and Digital Vert Shift is only
available after adjusting the Digital Vert Zoom.
1. Select Menu > Size & Position > Digital Horz Shift or Digital Vert Shift.
2. Adjust the slider by arrow keys or select ENTER to input the value you selected.
3. After inputting the value, select ENTER to apply.

Geometry correction

Modify the geometry of the display image directly on the projector.
Connecting to Christie Twist and Mystique grays out the geometry correction settings on the
projector. Uploading warp and blend from Twist and Mystique overwrites the currently applied
geometry correction settings. See

Saving geometry correction

Save the warp and blend settings to the projector memory. The blend memory saves the edge blend
settings, while the warp memory saves the settings of Keystone, Pincushion, 4-Corner, Manual Warp
Filter, and image warp.
1. Select Menu > Size & Position > Geometry Correction > Warp Memory > Save Warp or
Blend Memory > Save Blend.
2. To save the geometry setting, select a record.
One projector can save up to four warps and four blends.
3. To confirm the selection, select ENTER.
HS Series 2K User Manual
020-002040-01 Rev. 1 (05-2023)
Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Configuring warp and blend
Adjusting the size and position
on page 35 for more details.
30