Geometry Correction; Enabling Geometry Correction; Saving Geometry Correction; Applying Geometry Correction - Christie Inspire Series User Manual

Geometry correction

Modify the geometry of the display image directly on the projector.
Connecting to Christie Twist and Mystique grays out the geometry correction settings on the
projector. Uploading warp and blend from Twist and Mystique overwrites the currently applied
geometry correction settings. See

Enabling geometry correction

Enable or disable the geometry correction function including Warp, Blend, Keystone, Pincushion,
4-Corner, Auto Warp Filter, and Manual Warp Filter.
1. Select Menu > Size & Position > Geometry Correction > Geometry Enable.
2. To enable the setting, select ENTER.

Saving geometry correction

Save the warp and blend settings to the projector memory. The blend memory saves the edge blend
settings, while the warp memory saves the settings of Keystone, Pincushion, 4-Corner, Manual Warp
Filter, and image warp.
1. Select Menu > Size & Position > Geometry Correction > Warp Memory > Save Warp or
Blend Memory > Save Blend.
2. To save the geometry setting, select a record.
One projector can save up to four warps and four blends.
3. To confirm the selection, select ENTER.

Applying geometry correction

Apply the previously saved geometry setting to the projector.
1. Before applying the previous geometry setting, save the geometry setting to the projector.
See Saving geometry correction
2. Select Menu > Size & Position > Geometry Correction > Warp Memory > Apply Warp
or Blend Memory > Apply Blend.
3. To apply the specific geometry setting, select the required record.
4. To confirm the selection, select ENTER.
5. To erase the applied geometry setting, select Off.
Inspire Series 4K User Manual
020-002098-01 Rev. 1 (09-2023)
Copyright © 2023 Christie Digital Systems USA Inc. All rights reserved.
If printed, please recycle this document after use.
Configuring warp and blend
on page 28 for more information.
Adjusting the size and position
on page 33 for more details.
28