Resetting Black Level Blending; Geometry Correction; Enabling Warping - Christie Crimson Series User Manual

This option is selected by default.
• To manually set the widths, use the arrow keys to enter the pixel values.
On the on-screen display or web user interface, you can enter the number directly in the field
using the remote or keyboard.
4. Select Apply.
5. Select MENU > Configuration > Black Level Blending > Black Level Blend Offset.
6. To adjust the brightness and black hues of the blended region, use the arrow keys to enter the
pixel values.
On the on-screen display or web user interface, you can enter the number directly in the field
using the remote or keyboard.
7. If using the web user interface, you can adjust the brightness and black hues in more detail by
modifying the values in the Fine Adjustment and Course Adjustment fields.
8. Select Apply.
9. Repeat steps 2 to 8 for the remaining projectors.

Resetting black level blending

Reset the black level blending to revert any black level blends.
Pressing Func+Help on the IR remote keypad disables all geometry corrections (warping, keystone,
and black level blending) without changing the settings associated with them.
1. Select MENU > Configuration > Black Level Blending.
2. Select Reset Black Level Blends.
3. At the confirmation prompt, select Reset.
After the reset, the black level blend offsets are set to 0, Use Edge Blend Width Values
checkbox is selected, and the edge blend values are used; however, the black level blend
widths are not set to zero.

Geometry correction

Modify the geometry for all sources.

Enabling warping

Use warping to project images on any surface shape.
1. Create a warp file using the Twist or Mystique application.
To connect Crimson Series with Twist or Mystique, use port 3003.
Christie Twist Premium, Twist Pro, and Mystique offer advanced warping options. Refer to the
Christie website (www.christiedigital.com) for product information and documentation.
2. Upload the warp file to the projector.
3. Select MENU > Configuration > Geometry Correction > Geometry Correction Mode.
4. Select the appropriate warp setting and select Enter.
5. To turn off warping, from MENU > Configuration > Geometry Correction > Geometry
Correction Mode, select Off.
Crimson Series User Guide
020-102649-07 Rev. 1 (05-2023)
Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Adjusting the image
34