Wrp-Geometry Correction - Christie Boxer 30 Technical Reference

Use the UST lens keep-out area:
(UST+ENBL 1)
WRP–Geometry Correction
Controls warping settings.
Basic warping/keystoning can be configured using the projector's side panel display, on-screen display
or web interface. To add complex or advanced warping/keystone configurations, use the Christie Twist
(AutoCal) application.
Commands
Command Description
WRP+KGAN? Returns if gain compensation is enabled or
disabled when 2D keystone is applied.
(Read-only)
WRP+KGAN <value> Enables or disables gain compensation when
2D keystone is applied.
WRP+SLCT?L Retrieves a list of available warp maps.
(Read-only)
WRP+SLCT <value> Changes the warp map to use on the
projector. This command is only available if
video electronics are on. (Saved value)
Examples
Disable warping:
(WRP+SLCT 0)
Select the third warp map:
(WRP+SLCT 3)
Retrieve a list of available warp maps:
(WRP+SLCT?L)
Enable gain compensation:
(WRP+KGAN 1)
Boxer 30 Technical Reference–Serial API Commands
020-102096-08 Rev. 1 (08-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Serial API commands
Values
—
0 = Disables gain compensation
1 = Enables gain compensation (Default)
—
0 = Turns off warping
1 to 4 = Selects one of four warp maps, if
available
11 = Selects on-board keystone correction
mode
61