Wrp-Geometry Correction - Christie 599 GS Series Technical Reference

Commands
Command Description
WPK <value> Sets the white peak.
Examples
Set the white peak to 50:
(WPK 50)
WRP–Geometry Correction
Applies a geometry correction to an image.
Commands
Command Description
WRP+SLCT <value> Applies a geometry correction to
an image.
WRP+HKST <value> Corrects image distortion
created when the projected
image is to the left or right of
the lens axis. Increase the value
to in crease right keystoning.
WRP+VKST <value> Corrects the distortion created
when the projected image is
above or below the lens axis.
Increase the value to increase
positive keystoning.
GS Series 599 Serial Commands Technical Reference
020-102403-02 Rev. 1 (04-2017)
Copyright 2017 Christie Digital Systems USA Inc. All rights reserved.
©
Values
0 to 100
Values
0 = Off—Does not apply a geometry correction to the
image (Default)
1 = Basic—Adjusts keystone and pincushion when a
Dual Processor Warp module (DPWM) is not installed. If
a DPWM is installed, keystone, pincushion/barrel, and
four-corner can be adjusted.
2 = Curve—Adjusts curve and four-corner when a
DPWM is installed; this option is unavailable if a DPWM
is not installed
3 = Rotate—Adjusts rotate and four-corner when a
DPWM is installed; this option is unavailable if a DPWM
is not installed
When DPWM is not installed, adjustment range is:
0 to 100
50 (Default)
When DPWM is installed, adjustment range is:
0 to 20
10 (Default)
When DPWM is not installed, adjustment range is:
0 to 100
50 (Default)
When DPWM is installed, adjustment range is:
0 to 20
10 (Default)
Serial API commands
63