Configuring Live View Settings; Figure 134 Illegal Login; Table 62 Illegal Login Parameters - Honeywell Performance Series User Manual

Figure 134 Illegal Login

2. Select Enable and configure parameters.

Table 62 Illegal Login Parameters

Parameter
Alarm-out Port
Post Alarm
Buzzer
Alarm Tone
Log
Send Email

Configuring Live View Settings

After you logged in, the system goes to multiple-channel live view mode
by default. You can view the monitor video of each channel.
The displayed window amount may vary. The actual product shall prevail.
Performance Series Embedded NVR User Guide
Description
The alarm device (such as lights, sirens, etc.) is connected to the alarm output
port. When an alarm occurs, the NVR device transmits the alarm information
to the alarm device.
When the alarm ends, the alarm extended for a period of time. The time range
is from 0 seconds to 300 seconds.
Select the check box to activate the buzzer when an alarm occurs.
Check the box and then select the corresponding audio file from the
dropdown list. System plays the audio file when the alarm occurs.
See File Management to add audio file first.
Select the check box, the NVR device records the alarm information in the log
when an alarm occurs.
Select the check box. When an alarm occurs, the NVR device sends an email
to the set mailbox to notify the user.
You need to set the email first. For details, see Email.
119