Honeywell Performance Series User Manual page 149

Manual Snapshot
You can take one to five snapshots of the video and save into a USB
storage device.
By clicking
saved into the connected USB storage device. You can view the
snapshots on your PC.
Note: To change the quantity of snapshots, go to Main Menu > Camera >
Two-way Talk
You can perform the voice interaction between the Device and the
remote device to improve efficiency of emergency.
1. Click
2. Click
Switch Bit Streams
Via this function, you can switch the channel main stream/sub stream
according to current network bandwidth.
•
•
•
•
•
Shortcut Menu
By right-clicking on the live view interface, you can quickly access the
corresponding functional interface and perform relevant operations,
including entering the main menu, searching records and selecting
screen split mode.
Right-click on the live interface and the shortcut menu is displayed.
Note: The shortcut menu is different for different models. The actual
Performance Series Embedded NVR User Guide
, you can take snapshots. The snapshots are automatically
Encode > Snapshot, in the Manual Snapshot list, select the snapshot
quantity.
to start two-way talk function the icon now is shown as
Now the rest two-way talk buttons of digital channel becomes null
too.
again, you can cancel two-way talk.
M: Main stream. Its bit streams are big and definition is high. It
occupies large network bandwidth suitable for video wall
surveillance, storage and etc.
S: Sub stream. Its definition is low but occupies small network
bandwidth. It is suitable for general surveillance, remote connection
and etc.
Click to switch the bit stream type of the main stream and sub
stream.
M: Main stream.
S: Sub stream. Some series products support two sub streams (S1,
Encode
S2). Refer to
interface shall prevail.
for detailed information.
.
125