Figure 37 Manual Add; Table 18 Remote Channel Parameters - Honeywell Performance Series User Manual

Parameter
Added Device List
Delete
Import
Export
Manual Add
a. Click Manual Add.

Figure 37 Manual Add

b. Configure parameters.

Table 18 Remote Channel Parameters

Parameter
Channel
Manufacturer
IP Address
TCP Port
Username
Password
Remote CH No.
Decoder Strategy
34
Description
Displays the added devices. You can edit and delete the device and view
the device information.
Select the check box of the added device, and then click Delete to delete
the added device.
Select the searched devices and then click Import to import the devices
in batches.
Select the added devices and then click Export. The exported devices
information is saved into the USB storage device.
The Manual Add interface is displayed.
Description
From the Channel drop-down list, select the channel that you want
use on the Device to connect the remote device.
From the Manufacturer drop-down list, select the manufacturer of the
remote device.
In the IP Address box, enter the IP address of the remote device.
The default is 192.168.0.0 which the system cannot connect to.
The default value is 37777. You can enter the value as needed.
Enter the user name of the remote device.
Enter the password of the user for the remote device.
Enter the remote channel number of the remote device that you want
to add.
From the Decoder Strategy drop-down list, select Default, Realtime,
or Fluent.
Performance Series Embedded NVR User Guide