Figure 101 Basic Settings; Table 46 Basic Parameters - Honeywell Performance Series User Manual

Figure 101 Basic Settings

2. Set parameters.

Table 46 Basic parameters

Parameter
Device Name
Device No.
Language
Video Standard
Sync Remote Device
Instant Playback
Logout Time
CAM Time Sync
Interval
Logout Time
Navigation Bar
92
Description
Enter the Device name.
Enter a number for the Device.
Select a language for the Device system.
Select PAL or NTSC as needed.
Enable this function; the NVR can synchronize
information with the remote device such as
Language, video standard and time zone.
In the Instant Play box, enter the time length for
playing back the recorded video. The value ranges
from 5 to 60.
On the live view control bar, click the instant
playback button to play back the recorded video
within the configured time.
Enter the standby time for the Device. The Device
automatically logs out when it is not working in the
configured period. You need to login the Device
again.
The value ranges from 0 to 60. 0 indicates there is
not standby time for the Device.
Click Monitor Channel(s) when logout. You can
select the channels that you want to continue
monitoring when you logged out.
Syncs the Device time with IP camera.
Enter the interval for time sync.
You can set auto logout interval once login user
remains inactive for a specified time. Value ranges
from 0 to 60 minutes.
Enable the navigation bar. When you click on the
live view screen, the navigation bar is displayed.
Performance Series Embedded NVR User Guide