Figure 204 Smd; Table 85 Smd Parameters - Honeywell Performance Series User Manual

•
•
b. Click Apply to save the settings.
5. Click Apply button to complete setup.
SMD
You can use SMD (Smart Motion Detection) to detect human and vehicle
in the video, and store the detection result in structured storage for fast
retrieval.
1. Go to Main Menu > VA > Parameter > SMD.

Figure 204 SMD

2. Select and enable a channel, and then configure parameters.

Table 85 SMD Parameters

Parameter
Sensitivity
Effective Target
Schedule
Anti-Dither
184
pop-up interface. Click OK to save.
There are six periods for you to set for each day.
Under Copy, select All to apply the settings to all the days of a
week, or select specific day(s) that you want to apply the settings
to.
Description
The higher the value is, the easier it is to trigger an alarm. But at the same
time, the false alarm may occur. The default value is recommended.
Choose human or vehicle or both.
Configure the period and in the set time range, the corresponding
configuration item will be linked to start the alarm.
Indicates the time taken from the end of motion detection to the end of
alarm linkage action. The range is 0 to 600 seconds.
Performance Series Embedded NVR User Guide