Fisheye (Optional); Figure 146 Fisheye Shortcut - Honeywell Performance Series User Manual

Fisheye (Optional)

This function is for some series products only.
Fisheye De-warp on Live View Interface
The fisheye camera (panoramic camera) has wide video of angle but its
video is seriously distorted. The de-warp function can present the proper
and vivid video suitable for human eyes.
On the live view interface, select fisheye channel and then right click, you
can select Fisheye. You can set fisheye installation mode and display
mode.
Note:
•
•

Figure 146 Fisheye Shortcut

You can set fisheye installation mode and display mode. There are three
installation modes: ceiling mount/wall mount/ground mount.
Note:
•
•
130
For the non-fisheye channel, system pops up dialogue box to
remind you it is not a fisheye channel and does not support de-
warp function.
If system resources are insufficient, system pops up the
corresponding dialogue box too.
The different installations modes have different de-warp modes.
Some series products support 180°de-warp. 180°de-warp fisheye
supports wall mount de-warp only. The actual product shall
prevail.
Performance Series Embedded NVR User Guide