Figure 178 Video Loss - Honeywell Performance Series User Manual

Figure 178 Video Loss

2. To configure the settings for the video loss detection parameters,
3. Click Apply to complete the settings.
•
•
Video Tampering
When the camera lens is covered, or the video is displayed in a single
color because of sunlight status, the monitoring cannot be continued
normally. To avoid such situations, you can configure the tampering
alarm settings.
1. Go to Main Menu > Event > Video Detection > Video Tampering.
156
see Motion Detection.
The video loss function does not have region and sensitivity items.
Click Default to restore the default setting.
Click Copy to, in the Copy to dialog box, select the additional
channel(s) that you want to copy the motion detection settings to,
and then click Apply.
The Video Tampering interface is displayed.
Performance Series Embedded NVR User Guide