Figure 140 Digital Zoom Interface - Honeywell Performance Series User Manual

Instant replay is to playback the previous 5 minutes to 60 minutes record
of current channel.
•
•
•
•
•
Note: Go to the Main Menu > System > General > Basic to set Instant Replay
time. System may pop up a dialogue box if there is no such record in
current channel.
Digital Zoom
You can zoom in specified zone of current channel so that you can view
the details. It supports zoom in function of multiple-channel. It includes
the following two ways:
•
•
The digital zoom interface is shown as in Figure 4-63. When the image is
in the enlarged status, you can drag the image toward any direction to
view the other enlarged areas. Right click mouse to cancel zoom and go
back to the original interface.

Figure 140 Digital Zoom Interface

Instant Backup
You can record the video of any channel and save the clip into a USB
storage device.
By clicking
again. The clip is automatically saved into the connected USB storage
device.
You can record the video of any channel and save the clip into a USB
storage device.
124
Move the slider to choose the time you want to start playing.
Play, pause and close playback.
The information such as channel name and recording status icon
are shielded during instant playback and will not display until exited.
During playback, screen split layout switch is not allowed.
Tour high higher priority than the instant playback. The instant
playback function is null when tour function is in process and the
preview control interface auto hides either. The function becomes
valid again after tour is complete.
Click , the icon switches to
to select the area you want to enlarge. The area is enlarged after the
left mouse button is released.
Point to the center that you want to enlarge, rotate the wheel button
to enlarge the area.
, the recording is started. To stop recording, click this icon
. Hold down the left mouse button
Performance Series Embedded NVR User Guide