Table of Contents
Advertisement
Configuring the Web Client Settings
Configuring the Honeywell cameras with
MAXPRO NVR Wizard
Configuring the System Settings for MAXPRO
NVR
Configuring Disk Management Settings
Configuring the Cameras
MAXPRO NVR 3.1 Commissioning and Installation Guide
5.
Press Enter or click the
6.
Click the Configurator tab to open the Configurator screen.The System page opens by
default.
Refer to the MAXPRO NVR Web Client - Setting the MAXPRO Web Configurator section in the
MAXPRO NVR Operator's Guide for more information.
Using the MAXPRO NVR Wizard (3 Clicks to Live Video), you can configure Honeywell IP
MAXPRO NVR Operator's Guide
cameras. Refer to the
The System settings help in configuring the following:
•
General System Settings - enable configuring the device name, device description,
and device address for MAXPRO NVR.
•
Recording Settings - enable configuring the times associated to event and user
based recording.
•
Email Settings - enable configuring the SMTP server settings for e-mail
communication of events.
•
Holiday/Exception Settings for Schedules - enable configuring the holidays and
exceptions for schedule based recording.
To configure the system settings
•
Click the Configurator tab. The System page appears by default.
The Disk Management settings help you to configure the disk settings for saving the recorded
video.
To configure the disk management settings
1.
Click the Configurator tab. The System page appears by default.
2.
Click the Disk tab to open the Disk Management page.
You can configure and add cameras using the Camera tab.
To configure the cameras
1.
Click the Configurator tab. The System page appears by default.
2.
Click the Camera tab to open the Camera page.
C O N F I G U R I N G M A X P R O N V R
icon. The Viewer screen appears by default.
for more information.
Configuring MAXPRO NVR
67
Advertisement
Table of Contents
