Figure 106 User; Figure 107 Add; Table 49 Add Interface Parameters - Honeywell Performance Series User Manual

Figure 106 User

2. Click Add.

Figure 107 Add

3. Input the user name, password, select the group it belongs to from

Table 49 Add Interface Parameters

Parameter
Username
Password
Confirm Password
Remarks
Performance Series Embedded NVR User Guide
The Add interface is displayed.
the drop-down list. Then you can check the corresponding rights
for current user.
Description
Enter a user name and password for the account.
Re-enter the password.
Optional.
Enter a description of the account.
97