3. Select a time at the time bar and then click
4. Click
Figure 164 Clip
Record Backup
This function is to backup files you checked in the file list, or the file you
just clip.
1. Select the recorded video file that you want to back up. You can
•
•
2. Click
Figure 165 Backup
3. Click Backup to begin the process.
Smart Search Playback
Note: This function is for some series product only.
During playback process, it can analyze the motion detect zone in the
scene and give the analysis result.
This function is for channel that already enabled motion detect function
(Main Menu > Event > Video Detection > Motion Detection).
1. Select a channel to playback video and then click
•
142
, system pops up dialogue box to save the clip file.
select the following two types of files:
Recorded video file: Click
the file(s) that you want to back up.
Saves the clip footages as a record file.
, the Backup interface is displayed.
the grids on the playback video.
This function is for one-channel playback mode.
, the File List area is displayed. Select
Performance Series Embedded NVR User Guide
to stop clip.
. You can view