Disk Manager; Figure 86 Disk Manager Interface - Honeywell Performance Series User Manual

Note: Enable auto snapshot function so that the snapshot plan can become
activated. Refer to

Disk Manager

You can view and sett HDD properties and format HDD.
You can view current HDD type, status, capacity and etc. The operation includes
format HDD, and change HDD property (read and write/read-only/redundancy).
To prevent files be overwritten in the future, you can set HDD as read-
•
only.
To backup recorded video file, you can set HDD as redundant HDD.
•
1. Go to Main Menu > Storage > Disk Manager.

Figure 86 Disk Manager Interface

2. Select an HDD and then select a time from the drop-down list.
3. (Optional) Format an HDD.
a. Select an HDD and then click Format.
b. Click OK.
c. Enter the admin password and click OK.
Note: This operation will erase all data in the HDD, proceed with caution.
If xxx is selected, database will also be cleaned.
80
Record
The Disk Manager interface is displayed.
for detailed information.
Performance Series Embedded NVR User Guide