Figure 126 Account Lockout; Table 56 Account Lockout Parameters - Honeywell Performance Series User Manual

Parameter
Start Address
MAC Address
4. Click Apply to complete the settings.
Account Lockout
1. Go to Main Menu > Security Center > Attack Defense > Account

Figure 126 Account Lockout

2. Set parameters.

Table 56 Account Lockout Parameters

Parameter
Attempt(s)
Lock Time
3. Click Apply to complete the settings.
Anti-Dos Attack
You can enable SYN Flood Attack Defense and ICMP Flood Attack
Defense to defend the device against Dos attack.
112
Description
Enter Start Address and End Address of IP Segment.
When Type is IP Segment, they can be configured.
Enter MAC Address that is allowed or forbidden
When Type is MAC Address, they can be configured.
Lockout.
The Account Lockout interface is displayed.
Description
Set the maximum number of allowable wrong password entries. The
account will be locked after your entries exceed the maximum number.
Value range: 5–30.
Default value: 5.
Set how long the account is locked for.
Value range: 5–120 minutes.
Default value: 30 minutes.
Performance Series Embedded NVR User Guide