Figure 177 Period - Honeywell Performance Series User Manual

•

Figure 177 Period

3. On the Motion Detection interface, click Apply to complete the
Video Loss
When the video loss occurs, the system activates the alarm.
1. Go to Main Menu > Event > Video Detection > Video Loss.
Performance Series Embedded NVR User Guide
hour blocks to select the active periods, all the days with
take the same settings.
Define for all days of a week: Click All, all
timeline of any day, click the half-hour blocks to select the active
periods, all the days will take the same settings.
Define the period by editing. Take Sunday as an example.
a. Click .
The Period interface is displayed.
b. Enter the time frame for the period, and then select the check box
to enable the settings.
There are six periods for you to set for each day.
Under Copy to, select All to apply the settings to all the days of a
week, or select specific day(s) that you want to apply the settings
to.
c. Click OK to save the settings.
settings.
The Video Loss interface is displayed.
will
switches to . On the
155