Figure 124 802.1X; Table 54 802.1X Parameters - Honeywell Performance Series User Manual

Figure 124 802.1x

2. Select the Ethernet card you want to certify.
3. Select Enable and configure parameters.

Table 54 802.1x Parameters

Parameter
Authentication Mode
CA Certificate
Username
Password
4. Click Apply to complete the settings.
HTTPS
We recommend that you enable HTTPS function to enhance system
security.
1. Go to Main Menu > Security Center > System Service > HTTPS.
2. Enable HTTPS function.
3.
110
Description
•
•
Enable it and click Browse to import CA certificate from flash drive. For
details about importing and creating a certificate, see
The username shall be authorized at server.
Password of the corresponding username.
The HTTPS interface is displayed.
(Optional) Enable Compatible with TLSv1.1 and earlier versions
to allow protocol compatibility.
Performance Series Embedded NVR User Guide
PEAP: protected EAP protocol.
TLS: Transport Layer Security. Provide privacy and data integrity
between two communications application programs.
CA Certificate.