Resetting Password On Local Interface; Figure 24 Reset Password; Figure 25 Password Reset 1 - Honeywell Performance Series User Manual

Figure 24 Reset Password

2. Check the box to enable reset function.
3. Click Apply to set settings.

Resetting Password on Local Interface

1. Enter the Login interface.
2. Click Forgot Password. Set the parameters according to the

Figure 25 Password Reset 1

3. Set new password.
Performance Series Embedded NVR User Guide
•
If you have configured unlock pattern, the unlock pattern login
interface is displayed. Click Forgot Pattern, the password login
interface is displayed.
•
If you did not configure unlock pattern, the password login
interface is displayed.
instruction on the pages.
In the New Password box, enter the new password and enter it
again in the Confirm Password box.
25