Table of Contents
Advertisement
3.1 Configuration Web Page
Configuration of the NFN-GW-EM-3 is via a web page running on the NFN-GW-EM-3. Supported web
browsers are listed in
The following information applies to IP settings:
• Each NFN-GW-EM-3 is shipped with a default IP address of 192.168.1.2 and a default node number
of 240.
• The computer used to configure the NFN-GW-EM-3 must be able to establish an IP connection to the
gateway. Consult with a network administrator if unsure how to make this connection.
• Connecting more than one NFN-GW-EM-3 for configuration prior to reconfiguring the IP address
may result in an IP address conflict.
Refer to
Appendix A:, "Gateway
NFN-GW-EM-3.
3.2 Configuring the NFN-GW-EM-3
3.2.1 Logging into the Web Page
1.
Start the web browser.
2.
Navigate to the IP address of the NFN-GW-EM-3 (default http://192.168.1.2).
3.
If a security warning appears, select the option to continue anyway. Please refer to
Certificate"
4.
When the login dialog box is displayed, enter the password and click Login. If a password has not
been set, then you will be prompted to create the password. For details regarding the password,
refer to Tools > Set Device Password in
NFN-GW-EM-3 Installation and Operation Manual – P/N LS10017-000NF-E:C3 6/5/2014
Section 3 Configuration
1.3, "Required
Software".
Settings"for instructions on resetting and reviewing the IP settings of the
for more information.
3.2.3, "Main
Menus".
3.3, "Security
23
Advertisement
Table of Contents
