Figure 36 Search Device; Table 17 Camera List Parameters - Honeywell Performance Series User Manual

Figure 36 Search Device

Table 17 Camera List Parameters

Parameter
Uninitialized
Initialize
Filter
Searched Device
List
Search Device
Add
Manual Add
Performance Series Embedded NVR User Guide
c. Set parameters.
Description
Enable the Uninitialized function, the uninitialized devices out of the
searched devices are displayed in the searched device list.
Select the uninitialized device from the uninitialized device list, and the
click Initialize to start initializing device.
In the Show Filter list, select the remote device type that you want to
display in the searched device list.
•
•
•
•
Displays the searched devices. You can view the device information such
as status, IP address.
Click Search Device, the searched devices display in the searched device
list.
To adjust the display sequence, in the title line, you can click the IP
address, Manufacturer, Type, MAC Address, Port, or Device Name text.
For example, click the IP address text, the sequence icon
displayed.
"*" is displayed next to the added device.
In the Searched Device List area, select the device that you want to add.
Add the device by manually configuring settings such as IP address, and
channel selection.
None: Display all types of devices.
IPC: Display the front-end devices.
DVR: Display all storage devices such as NVR, DVR and HCVR.
OTHER: Display the devices that do not belong to IPC or DVR type.
is
33