Figure 38 Browse Interface - Honeywell Performance Series User Manual

•
IP Import
1. Click Import.

Figure 38 Browse Interface

2. Go to Address to select the import file and then click OK.
Note: If the imported IP has conflicted with current added device, system
pops up a dialogue box to remind you. You have two options.
3. Click OK.
Remote Device Initialization
You can change the login password and IP address of a remote device
when you initialize it.
36
If you clear the File Backup Encryption check box, the file format
is .csv. In this case, there might be a risk of data leakage.
The Browse interface is displayed.
System pops up a dialogue box to remind you successfully
imported.
The imported information is on the Added Device list.
Performance Series Embedded NVR User Guide