Figure 179 Video Tampering - Honeywell Performance Series User Manual

Figure 179 Video Tampering

2. To configure the settings for the tampering detection parameters,
Note: The Tampering function does not have region and sensitivity items.
3. Click Apply to complete the settings.
•
•
Scene Change
When the detected scene has changed, system can generate an alarm.
1. Go to Main Menu > Event > Video Detection > Scene Changing.
Performance Series Embedded NVR User Guide
see Motion Detection.
Click Default to restore the default setting.
Click Copy to, in the Copy to dialog box, select the additional
channel(s) that you want to copy the motion detection settings to,
and then click Apply.
The Scene Changing interface is displayed.
157