Ca Certificate; Figure 129 Device Certificate; Table 57 Sync Time-Allowlist Parameters; Table 58 Device Certificate Parameters - Honeywell Performance Series User Manual

Table 57 Sync Time-Allowlist Parameters

Parameter
Add
Type
IP Address
Start Address
End Address
4. Click Apply to complete the settings.

CA Certificate

Device Certificate
Create Certificate
1. Go to Main Menu > Security Center > CA Certificate > Device

Figure 129 Device Certificate

2. Create Certificate.
114
Description
You can add trusted hosts for time synchronization.
Select IP address or IP segment for hosts to be added.
Input the IP address of a trusted host.
When Type is IP Address, it can be configured
Input the start IP address of trusted hosts.
When Type is IP Segment, it can be configured
Input the end IP address of trusted hosts.
When Type is IP Segment, it can be configured
Certificate.
The Device Certificate interface is displayed.
•
Click Create Certificate and configure parameters.

Table 58 Device Certificate Parameters

Parameter
County
State
City Name
Valid Period
Organization
Performance Series Embedded NVR User Guide
Description
This parameter is user defined.
This parameter is user defined.
This parameter is user defined.
Input a valid period for the certificate.
This parameter is user defined.