Parameters; Figure 192 Smart Plan 1 - Honeywell Performance Series User Manual

Parameters

Smart Plan
The smart plan is for the smart network camera. If you do not set a rule
here, you cannot use these AI intelligent functions when you are
connecting to a smart network camera.
This series NVR products support AI by camera only. Make sure the
connected network camera supports intelligent functions. For NVR, it
just displays the intelligent alarm information from the smart network
camera and set or playback the record file.
1. Go to Main menu > VA > Parameters > Smart Plan.
2. Select a channel number.
Remote device supports preset function
170
The Smart Plan interface is displayed.

Figure 192 Smart Plan 1

System displays different smart plan interfaces since the remote
device may supports different functions.
Performance Series Embedded NVR User Guide