Figure 108 Modify User - Honeywell Performance Series User Manual

Parameter
User MAC
Group
Period
Permission
4. Click OK button.
Modify Password
1. Go to Main Menu > Account > User, click

Figure 108 Modify User

2. Check the box to enable Modify Password function. Enter old
•
•
•
98
Description
Enter user MAC address
Select a group for the account.
The user rights must be within the group permission.
Click Setting to display Setting interface.
Define a period during which the new account can login the device. The
new account cannot login the device during the time beyond the set
period.
In the Permission area, select the check boxes in the System tab,
Search tab, and Live tab.
To manage the user account easily, when defining the user account
authority, it is recommended not to give the authority to the common
user account higher that the advanced user account.
Click to modify the corresponding user information, click
delete the user.
user.
The Modify User interface is displayed.
password and then enter new password twice.
Password/confirm password: The password ranges from 8 to 32
digitals. It can contain letters, numbers and special characters
(excluding"'",""",";",":","&") . The password shall contain at least two
categories. Usually we recommend the strong password.
For the user of account authority, it can modify the password of
other user.
STRONG PASSWORD RECOMMENDED-For your device own
safety, create a strong password of your own choosing. We also
Performance Series Embedded NVR User Guide
to
of the corresponding