Figure 201 Queuing - Honeywell Performance Series User Manual

Parameter
Tour
Log
Voice Prompts
Buzzer
4. Click Apply.
Queuing
After connecting to the AI fisheye camera that supports the queuing
function, system can realize the corresponding linkage actions once the
people amount in the queue or the waiting time has trigger an alarm.
Select a region first to set the corresponding actions. For the same line,
the queue people number alarm and queue time alarm has the same
linkage actions.
1. Go to Main Menu > VA > Parameters > People Counting >
2. The Queuing interface is displayed.

Figure 201 Queuing

3. Select Channel, and then click Add.
4. Select the Enable check box.
5. Click
6. Click
7. Click
Performance Series Embedded NVR User Guide
Description
Select the check box and select the channel for tour. When an alarm occurs,
the local interface of the NVR device displays the selected channel screen.
•
You need to set the time interval and mode for tour first, see Tour.
•
After the tour is over, the preview interface is restored to the screen split
mode before the tour.
Select the check box, the NVR device records the alarm information in the log
when an alarm occurs.
Check the box and then select the corresponding audio file from the
dropdown list. System plays the audio file when the alarm occurs.
Refer to File Management
Select the check box to activate the buzzer when an alarm occurs.
Queuing.
to draw queuing rule and area.
under the Parameters column, and then select alarm
type to Queue People No. Alarm or Queue Time Alarm.
under the Trigger column and configure alarm linkages.
to add audio file first.
181