Figure 166 Add Tag - Honeywell Performance Series User Manual

•
2. Left click mouse and then drag to select smart search
3. Click
4. Click
•
•
•
•
Tag Playback
When you are playing back a video record, you can tag the record as
needed. After playback, you can use time or the tag keywords to search
corresponding record and then play. It is very easy for you to get the
important video information.
Add Tag
When system is playing back, click
interface.

Figure 166 Add Tag

Play back Tag
During 1-window playback mode, click
interface. Double-click one tag file, you can begin playback from the tag
time.
Play before tag time
Here you can set to begin playback from previous N seconds of the tag
time.
Usually, system can play back previous N seconds record if there is such
kind of record file. Otherwise, system playbacks from the previous X
seconds when there is such as kind of record.
Tag Manager
Performance Series Embedded NVR User Guide
If you are in multiple-channel playback mode, double-click a
channel first to switch to one-channel playback mode.
zones(22*18(PAL), 22*15(NTSC)).
to go to smart search and playback. System is going to
playback all motion detect record footages.
again to stop smart search function.
The motion detect region cannot be the full screen zone.
The motion detect region adopts the current whole play pane by
default.
Selects another file on the list, system begins playing the motion
detect footages of the file.
The time bar unit switch, backward play, frame by frame are null
when system is playing motion detect file.
, you can go to the following
, you can go to tag file list
143