Maintenance And Management; Figure 211 Test - Honeywell Performance Series User Manual

Figure 211 Test

2. In the Destination IP box, enter the IP address.
3. Click Test.

Maintenance and Management

Device Maintenance
When the Device has been running for a long time, you can configure the
auto reboot when the Device is not working. You can also configure the
case fan mode to reduce noise and extend the service life.
1. Go to Main Menu > Information > Manager > Maintenance.
Performance Series Embedded NVR User Guide
After testing is completed, the test result is displayed. You can
check the evaluation for average delay, packet loss, and network
status.
The Maintenance interface is displayed.
191