Figure 104 Add Holidays
3. Set holiday name, repeat mode and holiday mode.
4. Click Add, you can add current holiday to the list.
•
•
5. Click OK to save settings.
Serial Port
After setting RS-232 parameters, the NVR can use the COM port to
connect to other device to debug and operate.
1. Go to Main Menu > System > Serial Port.
2. The Serial Port interface is displayed.
Figure 105 Serial Port
3. Configure parameters.
Performance Series Embedded NVR User Guide
Click Add more to add new holiday information.
Click the drop-down list of the state; you can enable/disable
holiday date.
Click
to change the holiday information. Click
current date.
to delete
95