Upnp; Figure 65 Upnp Interface; Figure 66 Modify Upnp; Table 34 Upnp Parameters - Honeywell Performance Series User Manual

UPnP

You can map the relationship between the LAN and the WAN to access
the Device on the LAN through the IP address on the WAN.
1. Go to Main Menu > Network > UPnP.

Figure 65 UPnP Interface

Figure 66 Modify UPnP

2. Configure the settings for the UPnP parameters.

Table 34 UPnP Parameters

Parameter
Port Mapping
UPNP VAV Reporting
Status
LAN IP
Performance Series Embedded NVR User Guide
The UPnP interface is displayed.
Description
Enable the UPnP function.
Enable the UPNP VAV Reporting function.
Indicates the status of UPnP function.
Offline: Failed.
•
Online: Succeeded.
•
Enter IP address of router on the LAN.
After mapping succeeded, the system obtains IP address
automatically without performing any configurations.
63