YASKAWA DX100 Operator's Manual page 80

DX100
3 Teaching
3.2 Teaching Operation
Selecting the Tool Number
1. Press [SHIFT] + [COORD].
– When selecting the "JOINT," "XYZ/CYLINDRICAL," or "TOOL"
coordinates, press [SHIFT] + [COORD] and the TOOL NO. SELECT
window will be shown.
2. Select the desired tool number.
– The contents of the currently-selected job is displayed.
3. Press [SHIFT] + [COORD].
– The JOB CONTENT window appears.
Using Multiple Tools with One Manipulator
• When multiple tools are to be used with one manipulator,
set parameter S2C431 to 1.
SUPPLE-
MENT
• See chapter 2.3.4
details on this operation.
Setting the Interpolation Type
1. Press [MOTION TYPE].
2. Select the desired interpolation type.
– When [MOTION TYPE] is pressed, MOVJ
MOVS are displayed in order in the input buffer line.
工控帮助教小舒QQ:2823408167
3-13
"Tool Coordinates" at page 2-9 for
MOVL
该文档是极速PDF编辑器生成，
如果想去掉该提示,请访问并下载：
http://www.jisupdfeditor.com/
MOVC