Setting Position Variables Using The Axis Keys - YASKAWA DX100 Operator's Manual

DX100

3.9.4.7 Setting Position Variables Using the Axis Keys

3 Teaching
3.9 Other Job-editing Functions
Pulse Type
1. Select {VARIABLE} under the main menu.
2. Select desired position variable type.
– The desired variable window appears (robot, base, or station).
3. Press [SHIFT] + [ROBOT]. When you need an external axis position,
press [SHIFT]+[EX.AXIS].
(1) When there are two or more robot, base, or a station, specify the
axis with following operation.
• Robot
Each time [SHIFT] + [ROBOT] is pressed, the axis displayed on the
status line changes:
R1 R2 ...
• Base or Station
Each time [SHIFT]+[EX.AXIS] is pressed, the axis displayed on the
status line changes:
B1 B2 ...
(2) Check the selected axis on the status line.
4. Move the manipulator with the axis keys.
– Move the manipulator or the external axis to the desired position to
be set to position variable.
5. Press [MODIFY].
6. Press [ENTER].
XYZ Type
1. Select {VARIABLE} under the main menu.
2. Select desired position variable type.
(1) When there are two or more robot, base, or a station, specify the
axis with following operation.
• Robot
Each time [SHIFT] + [ROBOT] is pressed, the axis displayed on the
status line changes:
R1 R2 ...
• Base or Station
Each time [SHIFT]+[EX.AXIS] is pressed, the axis displayed on the
status line changes:
B1 B2 ...
(2) Check the selected axis on the status line.
3. Move the manipulator with the axis keys.
– Move the manipulator or the external axis to the desired position to
be set to position variable.
4. Press [MODIFY].
5. Press [ENTER].
工控帮助教小舒QQ:2823408167
3-80
R8.
B8 S1 S2 . S24.
R8.
B8 S1 S2 . S24.
该文档是极速PDF编辑器生成，
如果想去掉该提示,请访问并下载：
http://www.jisupdfeditor.com/