Welding Conditions Group Output Function; Operation Flow Chart; Procedure For Assigning The Group Output Relay - YASKAWA DX100 Operator's Manual

DX100

9.8.11 Welding Conditions Group Output Function

9.8.11.1 Operation Flow Chart

9.8.11.2 Procedure for Assigning the Group Output Relay

9 Spot Welding Application Using a Motor Gun
9.8 Other Functions Using a Motor Gun
With the welding conditions group output function, a group signal is output
to the Power Source during welding.
The following shows the operation flow chart for the welding conditions
group output function.
Assign the user signal for
the group output.
The following describes how to assign the signal number for group output
when executing the SVSPOT instruction.
1. Select {SPOT WELDING} from the main menu.
2. Select {I/O ALLOCATION}.
– The INPUT ALLOCATION window appears.
工控帮助教小舒QQ:2823408167
9-75
Start
Set the group output tag.
End
该文档是极速PDF编辑器生成，
如果想去掉该提示,请访问并下载：
http://www.jisupdfeditor.com/