Compact Flash (Cf Cards); Recommended Compact Flash Cards; Notes On Handling Compact Flash - YASKAWA DX100 Operator's Manual

DX100

7.1.1 Compact Flash (CF Cards)

7.1.1.1 Recommended Compact Flash Cards

7.1.1.2 Notes on handling Compact Flash

7 External Memory Devices
7.1 Memory Devices
The programming pendant is equipped with CF card slot. Use the FAT16
or FAT32 formatted Compact Flash.
Recommended products used for external memory of DX100 are listed
below. Model numbers are subject to be updated due to termination of
product and new addition. Contact Yaskawa representative when
necessary.
No. Manufacturer
1 Hagiwara Sys-Com
2 Hagiwara Sys-Com
3 Hagiwara Sys-Com
4 Hagiwara Sys-Com
5 AiliconSystem
• Do not drop or bend exerting any shock or strong force to the Com-
pact Flash.
• Keep away from water, oil, organic solvent, dust, and dirt.
• Do not use or keep the Compact Flash in places where strong static
electricity or electronic noise may occur.
• Do not insert or remove the Compact Flash or turn OFF the power
when accessing the Compact Flash (writing-in or reading-out the
Compact Flash data.)
• To protect the data, back up the data regularly on other media. Dam-
ages or loss of data due to operation errors or accidents can be min-
imized.
*Compact Flash has a limited life span.
The life span differs depending on products or status of use. However,
normal use of Compact Flash as an external memory device for the
DX100 does not adversely affect the Compact Flash. For details, refer to
instruction manuals for each medium.
工控帮助教小舒QQ:2823408167
7-2
Model Note
MCF10P-256MS 256MB
(IOOA II-YE2)
MCF10P-512MS (512MB)
MCF10P-A01GS (1GB)
MCF10P-A02GS (2GB)
SSD-C25M3512 "xxMB" denotes memory
size (up to 2GB).
该文档是极速PDF编辑器生成，
如果想去掉该提示,请访问并下载：
http://www.jisupdfeditor.com/