Setting Byte, Integer, Double Precision Integer, And Real Type Variables - YASKAWA DX100 Operator's Manual

DX100

3.9.4.1 Setting Byte, Integer, Double Precision Integer, and Real Type Variables

3 Teaching
3.9 Other Job-editing Functions
• Play Speed V:
MOVL V=I000
The variable I000 is used for speed V with this move
instruction.
The unit for V is 0.1mm per second.
For example, if I000 were set as 1000, the following would
be true:
I000=1000
Note that, depending on the unit being used, the value of
the variable and the value of the actual speed on occasion
might not match.
• Play Speed VJ:
NOTE
MOVL VJ=I000
The unit for VJ is 0.01%.
For example, if I000 were set as 1000, the following would
be true:
I000=1000
• Timer T:
TIMER T=I000
The unit for T is 0.01 seconds.
For example, if I000 were set as 1000, the following would
be true:
I000=1000
onds.
1. Select {VARIABLE} under the main menu.
– {BYTE}, {INTEGER}, {DOUBLE}, and {REAL} are displayed for the
sub menu.
2. Select desired variable type.
– The BYTE VARIABLE window appears. (Following is a case that
{BYTE} is selected.)
工控帮助教小舒QQ:2823408167
3-72
unit for V is 0.1mm/s V=100.0mm/s
unit for VJ is 0.01% VJ=10.00%.
unit for T is 0.01 seconds
该文档是极速PDF编辑器生成，
如果想去掉该提示,请访问并下载：
http://www.jisupdfeditor.com/
T=10.00 sec-